Those numbers you're seeing I believe is because your RAM's XMP profile is enabled as well. Gtxjackbauer Yup, clear CMOS and reflash if needed. We have not been able to reproduce this behavior. When you set everything back to auto, did you also remove the XMP profile?ĮVGATech_ChrisB Hi V84x4, We recommend to try clearing the CMOS with the button on the board and if it continues to try a second flash. Mike406 Only thing I could think of is that XMP profiles sometimes provide a CPU overclock. From the BIOS, navigate to the Save & Exit tab and open 'Select BIOS File.'.

Reboot the machine and go into the system BIOS.

zip file to USB flash drive (must be formatted as FAT32)

NOTE: If flash box immediately closes after flash attempt, the flash may need to be ran from a CMD prompt with administrator privileges or DOS version.

Then power on again and go into BIOS to setup.

After the flashing is finished, the system will automatically shut down.

DO NOT TURN OFF POWER OR RESET DURING THE FLASH PROCESS.

Go into the folder where you unzipped this package and update.bat.

First go into your BIOS and load defaults, save and exit.

zip file below for your motherboard: 151-HE-E999-KR - EVGA X99 Classified 150-HE-E997-KR - EVGA X99 FTW 131-HE-E995-KR - EVGA X99 Micro 131-HE-E095-KR - EVGA X99 Micro2 One nice new features of the EVGA X99 Motherboards is the ability to update Bios within the Bios.

Setting the Bios back to the Defaults before updating the Bios is one of the most forgotten process of updating the Motherboard Bios. I know how to save settings and exit the bios. Over clocked to 4.2 gh change multiplier to +125 Change ram to XMP then save bios and reboot everything is fine in windows Then go back into bios and set everything back to stock settings and save then reboot go back into bios only to see that the cpu has changed to 3.8 gh on it's own and that auto has changed back to manual so I change it to auto again and reboot back into the bios and now the multiplier has changed back to +125 but the cpu is back to auto I can replicate this every time so it wasnt just a 'ONE TIME' glitch So it seems that the X99 bios (When over clocking) need to be saved several times in order for the 'AUTO' changes to take affectĪny one else seeing this issue ? Anyone shed some light on something i'm doing wrong? Recently I bought my first X99 Micro 2 mb and 5820K cpu (I Love It) I updated the Bios to the latest and have been very happy But one thing I have noticed while playing around with settings and overclocking After I am done experimenting with over clocking in the bios and playing games on windows 10 I then put everything back to stock settings and reboot into windows only to find out that my bios settings didn't take So I go back into the bios and sure enough some of the settings are still enabled Example:

Asrock save bios settings